| No. | Brand | E | A | H | w | J | L | N | M |
| 77214A | Franke | - | - | 338.137 mm | - | - | 558.8 mm | - | - |
| 74150A | Franke | - | - | - | - | - | - | - | - |
| 66168L | Franke | - | - | - | - | - | - | - | - |
| 77274A | Franke | - | - | - | - | - | - | - | - |
| 69703L | Franke | - | - | - | - | - | - | - | - |
| 68715A | Franke | - | - | 320.675 mm | - | - | 539.75 mm | - | - |
| 68759A | Franke | - | - | - | - | - | - | - | - |
| 68968A | Franke | - | - | - | - | - | - | - | - |
| 77264A | Franke | - | - | - | - | - | - | - | - |
| 74104A | Franke | - | - | 222.25 mm | - | - | - | - | - |
| 68961A | Franke | - | - | 239.316 mm | - | - | - | - | - |
| 68958A | Franke | - | - | - | - | - | - | - | - |
| 73082L | Franke | - | - | - | - | - | - | - | - |
| 77232A | Franke | - | - | - | - | - | - | - | - |
| 68773A | Franke | - | - | - | - | - | - | - | - |
| 75054A | Franke | - | - | - | - | - | - | - | - |
| 68643A | Franke | - | - | - | - | - | - | - | - |
| 71033A | Franke | - | - | - | - | - | - | - | - |
| 66171L | Franke | - | - | 495.3 mm | - | - | 869.95 mm | - | - |
| 74124A | Franke | - | - | - | - | - | - | - | - |
| 77290B | Franke | - | - | - | - | - | - | - | - |
| 68781A | Franke | - | - | - | - | - | - | - | - |
| 77226B | Franke | - | - | - | - | - | - | - | - |
| 75080A | Franke | - | - | - | - | - | - | - | - |
| 66394L | Franke | - | - | - | - | - | - | - | - |
| 68755A | Franke | - | - | - | - | - | - | - | - |
| 67507A | Franke | - | - | - | - | - | - | - | - |
| 68669A Franke Slewing Ring Bearings | Specific dynamic load factor K:25 N/mm²; D:16 mm; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; d:10 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:0.021 kg; Coefficient of friction µ min.:0.08; B:20 mm; Tolerance shaft:e7; Specific static load factor K0:45 N/mm²; |
| 68310A Franke Slewing Ring Bearings | ra (max):1 mm; Da (max):85 mm; Weight:0.210 kg; Limiting Speed - Oil:8,500 rpm; Static Load Rating:16,000 N; D:90 mm; B:13 mm; Dynamic Load Rating:17,400 N; Fillet Radius/Chamfer:1 mm; r1:0.5 mm; Factor fo:16.5; Limiting Speed - Grease:7,100 rpm; D1 (max):87.9 mm; Radial Clearance:0.023 to 0.043 mm; da (min):70 mm; a (max):2.1 mm; Dx (min):96 mm; Snap Ring Outside Diameter:94.4 mm; b (min):1.3 mm; |
| 77290A Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:220000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3400 rpm; D:170.0000 mm; Fillet Radius ra:2.00 mm; B:64.00 mm; Basic Dynamic Radial Load Rating C:199000 N; Grease Speed Rating n1:2400 rpm; d:95.000 mm; |
| 68577A Franke Slewing Ring Bearings | d:85 mm; r3,4 min.:3 mm; Mass angle ring:0.59 kg; B1:12 mm; B2:22 mm; d1 ≈:117 mm; |
| 75067A Franke Slewing Ring Bearings | Hydraulic nut:HMV 126 E; A:11 mm; d1:570 mm; Mass withdrawal sleeve:120 kg; B1:355 mm; G:Tr 630x6; G2:G 1/4; B2:369 mm; G1:55 mm; d:600 mm; |
| 68491A Franke Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:2600 rpm; B:60.00 mm; Grease Speed Rating Open/Shielded n1:2100 rpm; Basic Static Radial Load Rating Co:300000 N; Accessories:Two Shields; D:265.0000 mm; d:100.000 mm; Basic Dynamic Radial Load Rating C:251000 N; Fillet Radius ra:3.00 mm; |
| 73045L Franke Slewing Ring Bearings | Da (max):96 mm; B:10 mm; Radial Clearance:0.025 to 0.051 mm; Groove Diameter:97.9 mm; Enclosure:Open; Fillet Radius/Chamfer:0.6 mm; Dx (min):106 mm; Bore Type:Cylindrical Bore; Weight:0.160 kg; Groove Width:1.3 mm; Configuration:Single Row; r1:0.5 mm; Limiting Speed - Grease:6,000 rpm; d:80 mm; Dynamic Load Rating:12,700 N; da (min):84 mm; Factor fo:15.9; Limiting Speed - Oil:7,100 rpm; ra (max):0.6 mm; |
| 77268A Franke Slewing Ring Bearings | dd (min):116 mm; dc (min):109 mm; d:90 mm; Static Load Rating:178,000 N; db (min):100 mm; Limiting Speed - Grease:4,000 rpm; ra (max):2 mm; B:30 mm; Dynamic Load Rating:152,000 N; D:160 mm; Da (max):150 mm; r1:2 mm; Weight:2.300 kg; Fillet Radius/Chamfer:2 mm; ra1 (max):2 mm; Radial Clearance:0.075 to 0.110 mm; db (max):105 mm; Bore Type:Cylindrical Bore; Configuration:Single Row; Enclosure:Open; |
| 68629A Franke Slewing Ring Bearings | Radial Clearance:0.025 to 0.051 mm; ra (max):1 mm; Bore Type:Cylindrical Bore; Da (max):119 mm; Factor fo:15.6; Static Load Rating:39,500 N; Weight:0.855 kg; Fillet Radius/Chamfer:1.1 mm; Limiting Speed - Grease:5,300 rpm; Enclosure:Double Shield; d:80 mm; D:125 mm; da (min):86 mm; Configuration:Single Row; B:22 mm; Dynamic Load Rating:47,500 N; |
| 73082L Franke Slewing Ring Bearings | d:150.000 mm; B:38.00 mm; Basic Dynamic Radial Load Rating C:176000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3200 rpm; Fillet Radius ra:2.00 mm; D:235.0000 mm; Basic Static Radial Load Rating Co:200000 N; Grease Speed Rating n1:2600 rpm; |
| 66155L Franke Slewing Ring Bearings | Pa:25.4 kN; N1:25.4 mm; A2:206.375 mm; Appropriate attachment bolt size G:0.875 in; h:51.594 mm; Cap bolt recommended tightening torque:1220 N·m; L:466.725 mm; J min.:371.475 mm; Housing:SAF 032 KA; P120°:73.8 kN; Bearing limiting speed:3000 r/min; J max.:406.4 mm; Cap bolt, SAE grade:8; Mass pillow block:79.7 kg; da:139.7 mm; P60°:189 kN; R2:36.513 mm; H:287.337 mm; End plug (suffix Y):EPR 16; |
| 75039A Franke Slewing Ring Bearings | Bore Type:Tapered Bore; Static Load Rating:10,100,000 N; da (min):508 mm; d:480 mm; Groove Width A:40 mm; Axial Load Factor Y0:2.15; Limiting Speed - Grease:510 rpm; Nr. of Holes:8; Constant e:0.31; ra (max):5 mm; Radial Clearance:0.490 to 0.630 mm; D:700 mm; Roller Profile:Symmetric; Configuration:Double Row; Da (max):672 mm; Hole Diameter (do):20 mm; Weight:290.000 kg; Center Guidance:Fixed Inner Ring Rib; |
| 77272A Franke Slewing Ring Bearings | Oil Speed Rating n2:3600 rpm; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:3000 rpm; Fillet Radius rb:1.00 mm; B:47.00 mm; D:215.0000 mm; d:100.000 mm; Basic Dynamic Radial Load Rating C:212000 N; Basic Static Radial Load Rating Co:200000 N; |
| 75020A Franke Slewing Ring Bearings | Enclosure:Double Shield; Bore Type:Cylindrical Bore; Weight:0.070 kg; ra:0.6 mm; D:35 mm; Fillet Radius/Chamfer:0.6 mm; Da:30 mm; Limiting Speed - Oil:12,000 rpm; B:15.9 mm; Static Load Rating:6,850 N; Dynamic Load Rating:11,400 N; da:20 mm; Configuration:Double Row; Radial Clearance:0.011 to 0.025 mm; d:15 mm; |
| 68489A Franke Slewing Ring Bearings | Limiting Speed - Grease:6,400 rpm; B:27 mm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:2 mm; d:50 mm; Dynamic Load Rating:62,000 N; Factor fo:13.1; D:110 mm; Groove Width:2.7 mm; Cy (max):5.4 mm; ra (max):2 mm; Weight:1.070 kg; Dx (min):118 mm; r1:0.5 mm; Groove Diameter:106.8 mm; Configuration:Single Row; Enclosure:Open; Static Load Rating:38,100 N; a (max):3.3 mm; da (min):60 mm; |
| 77226A Franke Slewing Ring Bearings | db (max):214 mm; Static Load Rating:675,000 N; Limiting Speed - Grease:1,900 rpm; Weight:18.300 kg; ra (max):3 mm; dc (min):221 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:2,200 rpm; D:320 mm; ra1 (max):3 mm; Fillet Radius/Chamfer:4 mm; Dynamic Load Rating:495,000 N; Configuration:Single Row; B:52 mm; Db (max):294 mm; r1:4 mm; db (min):198 mm; d:180 mm; Db (min):302 mm; da (min):198 mm; |
66393L Franke Slewing Ring Bearings Video
RIDGID PC-612 + PCS-500 (66393) Pipe Saw Kit with Cutting ...
Product Features: Interchangeable cutting head cuts up to 12 in. pipe with a 1/2 in. wall thickness; Compatible with two clamp sizes: 1" to 6" (sold ...
66393-1 : AMP Power Contacts | TE Connectivity
66393-1 · AMP Type III+, Power Contacts, Contact, Precious Metal, 30 – 26 AWG Wire Size, .05 – .15 mm² Wire Size, Wire & Cable, Crimp, Power & Signal, Pin.
66393-3 TE Connectivity AMP Connectors - Digikey
Order today, ships today. 66393-3 – Pin Contact Gold Crimp 26-30 AWG Stamped from TE Connectivity AMP Connectors. Pricing and Availability on millions of ...
RIDGID PipeSaw PCS-500 Kit - PC-612 6" - 12" Clamp 66393
PipeSaw Kit w/ Cutting Head & 6 - 12" Clamp 66393. Cut pipe fast and efficiently with the RIDGID PipeSaw. From the fab shop to the field; this tool delivers ...
RIDGID Pipesaw Kit with Cutting Head & 6-12 in. Clamp R66393
Pipesaw Kit with Cutting Head & 6-12 in. Clamp. Part #R66393 | Item #9507559 | Manufacturer Part #66393. RIDGID Pipesaw Kit with Cutting Head & 6-12 in.
Ridgid 66393 PipeSaw Kit with Cutting Head & 6” – 12” Clamp
SKU: Ridgid 66393. UPC: 95691663931.00. Weight: 68.2 lbs. Ridgid 66393 PipeSaw Kit with Cutting Head & 6” – 12” Clamp. List: $4,123.10 $4,003.00 + Free ...
66393L Slewing Ring Bearings
66393L Slewing Ring Bearings ; Outside Diameter Of Outer Ring, 26 mm ; Weight, 58.9 Kg ; Basic Dynamic Load Rating Axial (Ca), 143000 N ; Basic Static Load Rating ...