| No. | Brand | E | A | H | w | J | L | N | M |
| 68489A | Franke | - | - | - | - | - | - | - | - |
| 77218A | Franke | - | - | - | - | - | - | - | - |
| 73106L | Franke | - | 345 mm | - | - | - | - | - | - |
| 68723A | Franke | - | - | - | - | - | - | - | - |
| 73052L | Franke | - | - | - | - | - | - | - | - |
| 75060A | Franke | 10 mm | - | - | - | - | - | - | - |
| 77290A | Franke | - | - | - | - | - | - | - | - |
| 68615A | Franke | - | - | - | - | - | - | - | - |
| 77276B | Franke | - | - | - | - | - | - | - | - |
| 77268A | Franke | - | - | - | - | - | - | - | - |
| 75040A | Franke | - | - | - | - | - | - | - | - |
| 75023A | Franke | - | - | - | - | - | - | - | - |
| 77252B | Franke | - | - | - | - | - | - | - | - |
| 68969A | Franke | - | - | - | - | - | - | - | - |
| 68653A | Franke | - | - | - | - | - | - | - | - |
| 74066A | Franke | - | - | - | - | - | - | - | - |
| 75010A | Franke | - | - | - | - | - | - | - | - |
| 66170L | Franke | - | - | - | - | - | - | - | - |
| 73071L | Franke | - | - | - | - | - | 387.35 mm | - | - |
| 73076L | Franke | - | - | - | - | - | - | - | - |
| 73058L | Franke | - | - | - | - | - | - | - | - |
| 68803A | Franke | - | - | - | - | - | - | - | - |
| 66185L | Franke | - | - | - | - | - | - | - | - |
| 77295A | Franke | - | - | - | - | - | - | - | - |
| 68953A Franke Slewing Ring Bearings | ra max.:6 mm; Limiting speed:200 r/min; Basic dynamic load rating C:8500 kN; Basic static load rating C0:49000 kN; B:65 mm; d:900 mm; da min.:1130 mm; Minimum axial load factor A:190; r1,2 min.:7.5 mm; D:1180 mm; d1:1175 mm; H:220 mm; Da max.:950 mm; D1:905 mm; Mass bearing:698 kg; Fatigue load limit Pu:2650 kN; Reference speed:100 r/min; |
| 77252A Franke Slewing Ring Bearings | D:140.0000 mm; Grease Speed Rating n1:4800 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:5600 rpm; B:24.00 mm; Basic Static Radial Load Rating Co:68000 N; Fillet Radius rb:0.60 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:68900 N; |
| 68566A Franke Slewing Ring Bearings | J1:133.35 mm; PG:1/4 NPT; Mass pillow block:262 kg; Adapter sleeve assembly:SNW 44x7.1/2; P120°:260 kN; Cap bolt, SAE grade:8; P150°:236 kN; S:4.763 mm; A1:222.25 mm; Initial grease fill:2749.95 g; PosiTrac Plus contact element:2 x B10724-167; Max. speed for PosiTrac Plus seal:725 r/min; J max.:708.025 mm; L:831.85 mm; P180°:285 kN; R1:130.175 mm; ba:90.487 mm; Cap bolt recommended tightening torque:4284.4 N·m; |
| 68681A Franke Slewing Ring Bearings | Da max.:43.8 mm; Preload class B GB:210 N; Static axial stiffness, preload class C:117 N/µm; Calculation factor f2B:1.03; da min.:28.2 mm; r3,4 min.:0.3 mm; rb max.:0.3 mm; Static axial stiffness, preload class A:59 N/µm; Mass bearing:0.074 kg; Calculation factor e:0.68; Calculation factor f:1.05; d2:29.8 mm; r1,2 min.:0.6 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; ra max.:0.6 mm; |
| 74175A Franke Slewing Ring Bearings | r1:0.6 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:12,000 rpm; Da (max):56 mm; ra1 (max):0.6 mm; B:20 mm; Static Load Rating:33,000 N; Fillet Radius/Chamfer:1 mm; db (min):35 mm; Enclosure:Open; Inside Ring Outside Diameter:38.5 mm; dd (min):44 mm; D:62 mm; db (max):37 mm; Limiting Speed - Grease:10,000 rpm; Radial Clearance:0.035 to 0.060 mm; d:30 mm; ra (max):1 mm; Dynamic Load Rating:33,000 N; |
| 75060A Franke Slewing Ring Bearings | Reference speed:32000 r/min; Db:7.3 mm; Basic dynamic load rating C:2.81 kN; Fw:7 mm; D:14 mm; E:10 mm; da:9.7 mm; Mass bearing:0.006 kg; Limiting speed:36000 r/min; r1,2 min.:0.3 mm; Basic static load rating C0:2.75 kN; C:8 mm; ra max.:0.3 mm; Fatigue load limit Pu:0.29 kN; Da:10.3 mm; |
| 75069A Franke Slewing Ring Bearings | D2:30 mm; d:16.06 mm; D:91 mm; Mass:0.46 kg; Shaft design:Without shaft; r:1.5 mm; Flange design:Flange with attachme; Corrosion protection:Zinc-coated housing; Maximum disc diameter max.:500 mm; D1:55 mm; B:31.5 mm; Recommended minimum temperature min.:-20 °C; Recommended lower temperature limit for storage (static):-50 °C; b:2 mm; Housing material:Sheet steel; Minimum rotational disc speed min.:100 r/min; |
| 66392L Franke Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:76100 N; Oil Speed Rating n2:6300 rpm; D:100.0000 mm; Basic Static Radial Load Rating Co:49000 N; B:44.40 mm; Fillet Radius ra:1.50 mm; d:35.000 mm; Grease Speed Rating n1:4800 rpm; |
| 66168L Franke Slewing Ring Bearings | db (min):78.5 mm; Weight:1.140 kg; B:24 mm; r1:1.5 mm; d:70 mm; Outside Ring Inside Diameter:110.5 mm; Db (min):116.5 mm; Limiting Speed - Oil:6,300 rpm; Static Load Rating:95,000 N; Bore Type:Cylindrical Bore; Db (max):114 mm; Fillet Radius/Chamfer:1.5 mm; Limiting Speed - Grease:5,000 rpm; Radial Clearance:0.065 to 0.100 mm; Dynamic Load Rating:83,500 N; Enclosure:Open; Da (max):116.5 mm; db (max):82 mm; |
| 74153A Franke Slewing Ring Bearings | Permissible sliding velocity v max.:0.5 m/s; Specific static load factor K0:45 N/mm²; Tolerance shaft:e7; D:20 mm; h:15 mm; Specific dynamic load factor K:25 N/mm²; B1:3 mm; Mass bushing:0.022 kg; a:3 mm; d:14 mm; α:105 °; D1:25 mm; Coefficient of friction µ max.:0.15; B:12 mm; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; Coefficient of friction µ min.:0.08; |
| 66170L Franke Slewing Ring Bearings | A2:260.35 mm; R1:87.313 mm; End plug (suffix Y):EPR 27; R2:38.1 mm; Eye bolt:2 x 3/8-16 UNC; H1:152.4 mm; P90°:180 kN; P150°:105 kN; P60°:301 kN; P180°:127 kN; h:51.594 mm; Cap bolt recommended tightening torque:515.2 N·m; Mass pillow block:94.3 kg; S:4.763 mm; Cap bolt:3/4-10 UNC; RG:3/4 NPT; Housing:SSAFS 528; da:122.237 mm; Max. speed for Taconite seal:625 r/min; Ca:77.8 mm; |
| 73087L Franke Slewing Ring Bearings | D:85.0000 mm; d:45.000 mm; Oil Speed Rating n2:9000 rpm; Basic Static Radial Load Rating Co:7800 N; Grease Speed Rating n1:7500 rpm; Fillet Radius ra:1.00 mm; B:19.00 mm; Basic Dynamic Radial Load Rating C:22900 N; |
| 66147L Franke Slewing Ring Bearings | α:6 °; Specific dynamic load factor K:100 N/mm²; r1 min.:1 mm; d:70 mm; B:49 mm; Mass rod end:7.9 kg; l2 max.:319 mm; C1 max.:43 mm; Material constant KM:330; dk:92 mm; l7 min.:85 mm; Basic dynamic load rating C:315 kN; Basic static load rating C0:490 kN; d2 max.:162 mm; l1 min.:125 mm; G:M 56x4; h:235 mm; |
| 77288B Franke Slewing Ring Bearings | D:190 mm; dc (min):117 mm; Da (max):176 mm; Weight:7.900 kg; d:90 mm; db (max):111 mm; Bore Type:Cylindrical Bore; ra (max):2.5 mm; ra1 (max):2.5 mm; Dynamic Load Rating:325,000 N; Radial Clearance:0.075 to 0.110 mm; Limiting Speed - Grease:2,800 rpm; Limiting Speed - Oil:3,600 rpm; dd (min):127 mm; Static Load Rating:395,000 N; db (min):104 mm; Enclosure:Open; r1:3 mm; B:64 mm; Configuration:Single Row; |
| 73095L Franke Slewing Ring Bearings | r1,2 min.:4 mm; C:88 mm; B:90 mm; Maximum dynamic radial loads Fr max.:455 kN; Basic dynamic load rating C:391 kN; Basic static load rating C0:540 kN; D:200 mm; Mass support roller:16.8 kg; d:80 mm; Maximum static radial loads F0r max.:640 kN; Fatigue load limit Pu:71 kN; Limiting speed:500 r/min; r, r3,4 min.:2 mm; d1:102 mm; |
| 75067A Franke Slewing Ring Bearings | Hydraulic nut:HMV 126 E; A:11 mm; d1:570 mm; Mass withdrawal sleeve:120 kg; B1:355 mm; G:Tr 630x6; G2:G 1/4; B2:369 mm; G1:55 mm; d:600 mm; |
77232A Franke Slewing Ring Bearings Video
77232A LILY Interchangeable From Franke Slewing Ring Bearings ...
77232A Slewing Ring Bearings ; Type, Ball ; System of Measurement, Metric ; Inside Diameter Of Inner Ring, 307.14 mm ; Outside Diameter Of Outer Ring, 332.86 mm.
Pilot G2 Gel-Ink Pen Refill, Extra Fine Tip, Black Ink, 2/Pack ...
Get Pilot G2 Gel-Ink Pen Refill, Extra Fine Tip, Black Ink, 2/Pack (77232) fast and with free shipping on qualifying orders at Staples.
563681 10/3 FLAT WG PVC 500 LOW PROF 77232A - First ...
563681 10/3 FLAT WG PVC 500 LOW PROF 77232A. Manufacturer: Southwire Company; Manufacturer #: 563681. The selected product is shipped in a predetermined ...
#77232a Color Hex
#77232a color RGB value is (119,35,42). #77232a hex color red value is 119, green value is 35 and the blue value of its RGB is 42.
#77232a Hex Color Code, RGB and Paints - Encycolorpedia
The hexadecimal color code #77232a is a medium dark shade of pink-red. In the RGB color model #77232a is comprised of 46.67% red, 13.73% green and 16.47% blue.
#77232a hex color
#77232a HTML & CSS CODE. CSS text color using an HTML tag.
Lorem ipsum.
. clipboard. CSS text, background, border color using a ...#77232a - Crown Of Thorns - RGB 119, 35, 42 Color Informations
77232a hex color code information, #77232A Crown Of Thorns colour description, schemes and conversion in RGB(119, 35, 42), CMYK, HSL, HSV etc.