| No. | Brand | r | d | B | D | C | G | Fw | B4 |
| 2 3074 01 | Rollix | - | - | - | 2.0490 in | - | - | - | - |
| 25 0641 01 | Rollix | - | 2.75 Inch | 1.375 Inch | 6.25 Inch | - | - | - | - |
| 28 0641 01 | Rollix | - | 1.3750 in | 0.6875 in | 3.0000 in | - | - | - | - |
| 1 141 | Rollix | - | 280 mm | 106 mm | 420 mm | - | - | - | - |
| 68497A | Franke | - | 2.4375 in | - | 4.3307 in | - | - | - | - |
| 36 1091 01 | Rollix | - | 0.7500 in | - | - | - | - | - | - |
| 33 0641 01 | Rollix | - | 1.438 Inch | 36.525 Millimeter | - | 2.75 Inch | 69.85 Millimeter | - | - | - | - |
| 7 0673 | Rollix | - | 20 mm | 3.5313 in | 2.7813 in | - | - | - | - |
| 6 1250 21 | Rollix | - | 70mm | 35mm | 150mm | - | - | - | - |
| 66142L | Franke | - | 50 mm | 197 mm | 157 mm | - | - | - | - |
| 1 0555 01 | Rollix | - | - | - | - | 167 | - | 100.5 | - |
| 68564A | Franke | - | - | - | - | - | - | - | - |
| 28 0741 01 | Rollix | - | - | 200 mm | - | - | - | - | - |
| 28 0841 01 | Rollix | - | 0.8750 in | 1-39/64 in | 2 in | - | - | - | - |
| 68532A | Franke | - | 30 mm | 15 mm | 62 mm | - | - | - | - |
| 33 0741 01 | Rollix | - | 1-5/16 in | - | 1-1/2 in | - | - | - | - |
| 37 0741 01 | Rollix | - | 3.9375 in | - | 8.8100 in | - | - | - | - |
| 22 1091 01 | Rollix | - | 0.7500 in | - | 3.5400 in | - | - | - | - |
| 77315A | Franke | - | 55 mm | 90.3 mm | 168 mm to 194 mm | - | - | - | - |
| 8 0980 06 | Rollix | - | 1/2 in | 3/4 mm | 3/4 in | - | - | - | - |
| 1 2202 | Rollix | - | 1.9375 in | 2.0313 in | 6.0000 to 6.5000 in | - | - | - | - |
| 73034L | Franke | - | - | - | - | - | - | - | - |
| 2 1805 02 Rollix Slewing Ring Bearings | standards met:SAE-AS7949, MIL-PRF-; finish/coating:Cadmium Plated; bearing material:Steel; bore type:Straight; application:Airframe Control; closure type:Double Sealed; inner ring width:25.4 mm; d:0.5000 in; maximum misalignment:10 °; B:1.0000 in; precision rating:Not Rated; outer ring width:20.62 mm; D:1.6875 in; internal clearance:C0; cage material:No Cage; series:DSP; |
| 37 1091 01 Rollix Slewing Ring Bearings | Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:14.528; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Eccentric Collar; Housing Style:4 Bolt Round Flange Cartridge; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:3/4 Inch; Relubricatable:Yes; Insert Part Number:22218; Seals:Triple Lip Nitrile Rubber; |
| 66395L Franke Slewing Ring Bearings | db:25; Prod_Type3:ACBB_SR_MM_DF; C0:15.3; ao:14.1; ra:1; d:20; SBRG:2; B_:14; ALP21:40; r1:0.6; Z_:11; Oil rpm:11000; DA_:7.938; KBRG:7231; ALPHA_:40; hidTable:ecat_NSANGB; D_a:41; C:21.6; m0:0.322; yobi:7204BWDF; |
| 8 0823 08 Rollix Slewing Ring Bearings | Weight:1.45 KGS; Seals or Shields:Open Type; B:29mm; Cage Type:Plastic; Clearance:Standard; Availability:In Stock; Static Load Rating (kN):58.5; d:55mm; SKU:7311beat85-nsk; Dynamic Load Rating (kN):85; D:120mm; |
| 6 0823 18 Rollix Slewing Ring Bearings | d:30mm; Seals or Shields:Open Type; Weight:0.02 KGS; D:72mm; SKU:1306k/236725-qbl; B:19mm; Clearance:Standard; Availability:In Stock; Cage Type:Steel; |
| 1 2040 03 Rollix Slewing Ring Bearings | cone width:1.0100 in; finish/coating:Uncoated; dynamic load capacity:19500 lbf; abma precision rating:Class 2; inner ring width:1.01 in; operating temperature range:-65 to +250 &de; manufacturer upc number:053893121123; compatible cup:2720, 2729, 2735X; static load capacity:23000 lbf; cage material:Steel; series:2700; d:1.3125 in; bearing material:Chrome Steel; |
| 68587A Franke Slewing Ring Bearings | Dynamic Load Rating (kN):90; Weight:1.78 KGS; Grease Limiting Speed (r/min):4300; d:60mm; B:31mm; D:130mm; Clearance:Standard; Oil Limiting Speed (r/min):5600; SKU:7312bmg-nsk; Cage Type:Brass; Static Load Rating (kN):65.5; Availability:In Stock; Seals or Shields:Open Type; |
| 66194L Franke Slewing Ring Bearings | Z_:12; DA_:12; db min:41.5; D_a max:72; SDM_:58.2; Macha rpm:11000; r:1.5; C0:65.5; DI_:46.2; d:35; yobi:NJ307EW; rb:1; Oil rpm:9500; C_conv:66500; dc min:48; dd min:53; KBRG:4153; hidYobi:NJ307EW; hidTable:ecat_NSCLDR; da:43; |
| 68733A Franke Slewing Ring Bearings | cone width:2.0938 in; operating temperature range:-65 to +250 &de; abma precision rating:Class 2; dynamic load capacity:142000 lbf; inner ring width:4-3/16 in; manufacturer upc number:053893383477; bearing material:Chrome Steel; d:4.5000 in; compatible cup:71751D; series:71000; finish/coating:Uncoated; |
| 21 0941 01 Rollix Slewing Ring Bearings | lubrication type:Lubrication Groove &; bearing type:Outer Ring; D:2.1875 in; Weight:0.28 lbs; operating temperature range:Max 300 °F; series:ORB; B:1.0310 in; manufacturer upc number:637400018733; manufacturer product page:Click here; finish/coating:Molybdenum Disulfide; outer ring type:Flat with Ring Groov; bearing material:52100 Bearing Steel; |
| 66167L Franke Slewing Ring Bearings | standards met:ASTMF-2431; type of needle bearing:Separable Inner Ring; D:1.6250 in; width:1.0000 in; closure type:N/A; compatible bearing:HJ-263516; minimum radius:1.52 mm; lubrication hole type:No Lubrication Hole; material:Chrome Steel; series:IR; d:1.3125 in; |
| 77282A Franke Slewing Ring Bearings | lubrication type:Lubrication Fitting; bore type:Round; D:5.6719 in; B:6.8750 in; d:1.5000 in; seal type:Contact Seal; housing material:PBT Thermoplastic; radial dynamic load capacity:2150 lbf; end type:Closed Cover & B; mounting type:Two-Bolt Flange; length through bore:0.866 in; radial static load capacity:1080 lbf; locking device:Set Screw; series:BNFL200MZ2CEB; replacement bearing:B8-24MZ2; |
| 38 0941 01 Rollix Slewing Ring Bearings | finish/coating:Uncoated; outer ring width:23 mm; d:50 mm; D:90 mm; series:22; fillet radius:1 mm; standards met:DIN 630; precision rating:Not Rated; operating temperature range:-30 to +100 &de; bore type:Tapered 1:12; dynamic load capacity:22900 N; internal clearance:C3; closure type:Double Sealed; cage material:Polyamide; maximum rpm:5300 RPM; B:23 mm; maximum misalignment:1.5 °; static load capacity:8000 N; |
| 24 0741 01 Rollix Slewing Ring Bearings | sleeve bearing type:Plain Sleeve; overall length:1 in; material specification:CT-1000-K26, SAE841; standards met:RoHS, REACH, DRC Con; iso grade:9001:2008 &; bearing material:Sintered Bronze Oil-; d:2 in; harmonization code:848330; series:SS; D:2-1/2 in; |
| 6 0980 09 Rollix Slewing Ring Bearings | manufacturer catalog:Click here; standards met:83-7-7-3, ASTM B505,; maximum pv value:75000; Weight:0.557 lb; groove/plug type:None; manufacturer upc number:717905061325; D:1-3/16 in; material specification:SAE 660 (C932&#; bearing material:Cast Bronze C93200 &; sleeve bearing type:Plain Sleeve; operating temperature range:Max 500 ºF; maximum v value:750 fp/min; d:13/16 in; |
| 34 0541 01 Rollix Slewing Ring Bearings | duty type:Extra Heavy Duty; finish/coating:Uncoated; seal type:Contact/Lip; manufacturer catalog number:076027; d:1.7500 in; expansion type:Non-Expansion Bearin; overall length:5.0000 in; overall height:4.2500 in; radial static load capacity:4906 lb; mounting:Tapped Base; base to bore centerline:2.1300 in; series:209; B:2 in; housing material:Cast Iron; locking device:Set Screw; D:3-3/4 in; |
2 204 Rollix Slewing Ring Bearings Video
2-204 Form 2. General Contract for Sale of Goods - Westlaw
Prac., UCC Forms § 2-204 Form 2 (3d ed.) Missouri Practice Series TM. |. November 2021 Update. Uniform Commercial Code Forms. William H. Henning.
Murder in the second degree, Md. Code, Crim. Law § 2-204
Section 2-204 - Murder in the second degree (a) A murder that is not in the first degree under § 2-201 of this subtitle is in the second degree.
§ 28:2–204. Formation in general. | D.C. Law Library
(1) A contract for sale of goods may be made in any manner sufficient to show agreement, including conduct by both parties which recognizes the existence of ...
§ 2-204 Formation in general | Osage Nation Code
A. A contract for sale of goods may be made in any manner sufficient to show agreement, including offer and acceptance, conduct by both parties which ...
1302.07. (UCC 2-204) Formation in general. - Justia Law
(A) A contract for sale of goods may be made in any manner sufficient to show agreement, including conduct by both parties which recognizes the existence of ...
2-204. Formation in General. | Uniform Commercial Code
(1) A contract for sale of goods may be made in any manner sufficient to show agreement, including conduct by both parties which recognizes the existence of ...
Uniform Commercial Code 2-204 - Nebraska Legislature
(1) A contract for sale of goods may be made in any manner sufficient to show agreement, including conduct by both parties which recognizes the existence of ...