| ISOSTATIC SF-4048-8 Sleeve Bearings | material:Steel; key width:0.594 in; series:W-000; number of tangs:19; d:6.389 in; face diameter:7.114 in; outside diameter over tangs:8.156 in; compatible lock nut number:N-032; |
| ISOSTATIC SS-2024-12 Sleeve Bearings | D:2.4409 in; bore type:Round; outer ring width:18 mm; radial static load capacity:2520 lbf; d:30 mm; radial dynamic load capacity:4380 lbf; finish/coating:ZMaRC; inner ring width:38.1 mm; locking device:Set Screw Collar; |
| ISOSTATIC B-2832-24 Sleeve Bearings | outer ring width:17 mm; d:25 mm; inner ring width:34 mm; seal type:Dual Lip with Slinge; radial dynamic load capacity:1430 kgf; D:52 mm; radial static load capacity:800 kgf; manufacturer product page:Click here; bore type:Round; series:UC200MZ2RF; |
| ISOSTATIC CB-0810-16 Sleeve Bearings | Recommended tightening torque for set screw:16.8 Nm; B:53.7 mm; d:61.91 mm; C0:32.8 kN; G:3/8-24UNF; T min.:-40 °C; r:1.1; T max.:100 °C; m:9.8 mm; S:14.9 mm; |
| ISOSTATIC AA-226 Sleeve Bearings | bearing bore diameter:1-3/4 in; compatible bearing part number:VE-228, VE-128; series:ELC; |
| ISOSTATIC B-1618-16 Sleeve Bearings | maximum rpm:3600 RPM; d:1.9375 in; lubrication type:Lubrication Fitting; seal type:Triple Lip with Flin; bore type:Round; D:6.1800 in; length through bore:2.16 in; standards met:UL, NSF H1, AFBMA, A; housing material:Polymer; duty type:Standard Duty; |
| ISOSTATIC CB-2032-24 Sleeve Bearings | thread type:UNF-3A; shank thread size:10-32; radial static load capacity:2851 lbf; head width:0.2500 in; race material:Steel; misalignment angle:13 º; manufacturer catalog:www.aurorabearing.co; overall height:1.5625 in; harmonization code:8483.30.8055; series:RAM; |
| ISOSTATIC SS-1016-16 Sleeve Bearings | J:63.5 mm; Designation of closed end cover:SCC204; L:86 mm; Designation of bearing:UC203G2; S:12.7 mm; Dz:54 mm; d:17 mm; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; B:31 mm; |
| ISOSTATIC EP-162128 Sleeve Bearings | Enclosure Type:Contact Seal; Mass:0.07 kg; Cage Material:Steel; Bore:0.787 Inch | 20 Mill; Brand:NTN; Noun:Bearing; da min:24 mm; Fatigue limit load, Cu:0.23 kN; Weight / Kilogram:0.85; |
| ISOSTATIC SS-812-16 Sleeve Bearings | S:6 mm; Z:42.9 mm; B:22 mm; H:30.2 mm; Dz:46 mm; d:15.88 mm; C:9.55 kN; J:95 mm; L:125 mm; H1:10 mm; |
| ISOSTATIC SS-814-10 Sleeve Bearings | C:96 kN; T max.:100 °C; s1:51.5 mm; d1:120 mm; SW:6 mm; Recommended tightening torque for set screw:33 Nm; C0:71.5 kN; d:90 mm; B:55 mm; Weight:4.9 kg; |
| ISOSTATIC EP-081024 Sleeve Bearings | e:16 mm; A2:35.5 mm; C:14 kN; Weight:0.57 kg; A:27 mm; Designation of bearing:US205G2T20; s1:13.5 mm; G:M6x1; L:68 mm; Z:24.2 mm; |